|
PRODUCT
SPECIFICATIONS - BENTONITE
|
| |
BENTONE 27
is an organic derivative of a special smectite.
This rheological additive is designed for
moderato to high polarity organic systems and
for synthetic binders.
| |
|
APPLICATIONS |
| 1.
Industrial
finishes |
6.
Plastisols, plastigels, organosols |
| 2.
Wash
primers |
7.
Adhesives and mastic compounds |
| 3.
Anti-corrosive
paints |
8.
Cosmetics |
| 4.
Anti-fouling
paints |
9.
Foundry mould paints |
| 5.
Gravure
and flexographic printing inks |
|
|
CHEMICAL
AND PHYSICAL DATA |
| 1.
Composition
: - Organic derivative of a special
magnesium montmorillonite |
| 2.
Colour
: - Creamy-white |
| 3.
Form
: - Finely divided powder |
| 4.
Moisture
: - max.3% |
| 1.
Material also available in powder/lums(raw)
format. |
| 2.
Bentonite powder available in packing: |
50 KGS. Second HDEP Bags |
|
40 KGS Second HDEP Bags |
|
50 KGS New HDEP Bags |
|
25 KGS New HDEP Bags |
|
40 KGS New HDEP Bags |
|
50 KGS New HDEP Bags in 1
M.T.
Fresh Jumbo packing. |
|
BENTONE 34
is an organic derivative of a special smectite.
This rheological additive is designed for low to
inter-mediate polarity organic systems in which
it develops optimum efficiency.
|
APPLICATIONS |
| 1.
Interior
and exterior house paints |
15.
Wood preservatives and finishing systems |
| 2.
Including
do it yourself paints |
16.
Putty and caulking compounds |
| 3.
Finishes
for household appliances |
17.
Underbody sealants and sound
absorbing |
| 4.
Automative
finished Compounds |
18.
Mould release agents |
| 5.
Refinish
systems |
19.
Greases |
| 6.
Coil
coating systems |
20.
Waxes |
| 7.
Dip
coatings |
21.
Buffing compounds |
| 8.
Primers,undercoats,fillers |
22.
Pints stripper pastes |
| 9.
Knifing
fillers |
23.
Adhesives |
| 10.
Anti-corrosivve
paints |
24.
Bituminous compositions |
| 11.
High
build system |
25.
Plastisols |
| 12.
Traffic
paints |
| 13.
Water-reducible
systems |
| 14.
Printing
inks |
CHEMICAL
AND PHYSICAL DATA
|
|
1.
Composition:
- Organic derivative of a special smectite. |
|
2.
Colour
:- Light cream. |
|
3.
Form
:- Finely divided powder. |
|
4.
Moisture
:- max.3%
|
| 1.
Material also available in powder/lums(raw)
format. |
| 2.
Bentonite powder available in packing: |
|
50 KGS. Second HDEP Bags. |
|
40 KGS Second HDEP Bags. |
|
50 KGS New HDEP Bags. |
|
25 KGS New HDEP Bags. |
|
40 KGS New HDEP Bags. |
|
50 KGS New HDEP Bags.
in 1 M.T. fresh Jumbo packing. |
|
|
BENTONE 38
is an organic derivative of a special smectite.
This highly efficient theological additive is
designed for low to intermediate polarity organic
systems in which it develops optimum efficiently.
|
APPLICATIONS
|
1.
Interior
and exterior house paints
|
8. Aerosol
paints |
2.
Industrial
paints
|
9. Anti-corrosive
paints |
3.
Automative
finishes
|
10. Plastisols,
plastigels, organosols |
4.
Refinish
systems
|
11. Rubber release
agents |
5.
Coil
coating systems
|
12. Adhesives and mastic
compounds |
6.
Trichloreoethylene
dip coatings
|
13. Cosmetics |
7.
Primers
|
|
CHEMICAL
AND PHYSICAL DATA
|
|
1.
Composition
:- Organic derivative of a special magnesium
montmorilionite.
|
|
2.
Colour
:- Creamy white.
|
|
3.
Form
:- Finely divided powder.
|
|
4.
Moisture
:- max.3%
|
|
1.
Material also available in powder/lums(raw) format.
|
|
2.
Bentonite powder available in packing
|
50 KGS. Second HDEP Bags.
|
40 KGS Second HDEP Bags.
|
50 KGS New HDEP Bags.
|
25 KGS New HDEP Bags.
|
40 KGS New HDEP Bags.
|
50 KGS New HDEP Bags in 1
M.T. Fresh Jumbo packing
|
|
|
|
SPECIFICATION OF BENTONE 100
|
TEST
REQUIREMENT |
| 1.
Green Permeobility 180 to 200% |
| 2.
Moisture 0.2 to 3% |
| 3.
Strength 7 to 8 Ibs |
| 4.
Min. 98% passed through 200 mesh |
| 1.
Material also available in powder/lums(raw) format. |
| 2.
Bentonite powder available in packing |
|
50 KGS. Second HDEP Bags. |
|
40 KGS Second HDEP Bags. |
|
50 KGS New HDEP Bags. |
|
25 KGS New HDEP Bags. |
|
40 KGS New HDEP Bags. |
|
50 KGS New HDEP Bags in 1
M.T. Fresh Jumbo packing |
|
|
|
SPECIFICATION OF BENTONE 128
BENTONE 128
is an organically modified smectite. This rheological
additive is designed for use in nonpolar printing inks
and organic solvent based inks and organic solvent
based inks of intermediate polarity.
|
APPLICATIONS |
| 1.
Offset
inks |
4.
UV curable inks |
| 2.
Letterpress
inks |
5.
Gravure printing inks |
| 3.
News
inks |
6.
Flexographic inks |
|
CHEMICAL
AND PHYSICAL DATA |
| 1.
Composition
:- Organic derivative of a special
montmorillonite clay |
| 2.
Colour
:- Creamy white |
| 3.
Form
:- Finely divided powder |
| 1.
Material also available in powder/lums(raw) format |
| 2.
Bentonite powder available in packing |
|
50 KGS. Second HDEP Bags |
|
40 KGS Second HDEP Bags |
|
50 KGS New HDEP Bags |
|
25 KGS New HDEP Bags |
|
40 KGS New HDEP Bags |
|
50 KGS New HDEP Bags in
1 M.T. Fresh Jumbo packing |
|
|
|
SPECIFICATION OF BENTONE 500
BENTONE 500
additive is an easy to disperse orgtanoclay
rheological additive that is useful in offset and
letterpress printing inks which are produced using
only moderate levels of shear. This rheological
additive requires neither the shear nor the chemical
activation needed when using conventional organoclays.
It is an efficient replacement for fumed silica and
other gelling agents. And BENTONE 500 additive
is most effective in printing inks containing
aliphatic, aromatic or naphthenic oils and solvents it
is not normally suitable for systems containing high
polarity, oxygenated solvent such as esters, ketones
and alcohols.
|
APPLICATIONS |
| 1.
Lithographic inks including web offset,
heatset, sheet fed offset and litho newsinks |
| 2.
Letterpress inks |
|
CHEMICAL
AND PHYSICAL DATA |
| 1.
Composition
:- Organic derivative of a special smectite
clay |
| 2.
Colour
:- Light cream |
| 3.
Form
:- Finely divided powder |
| 4.
Particle
size (dispersed) :- Less then 1 micron |
| 5.
Density
(g/cm3) :- 1.47 |
| 6.
Bulk
Density (g/cm3) :- 0.214 |
|
|
|
FOUNDRY GRADE BENTONITE POWDER
AS
PER IS 6186/1977 (APPENDIX-A)
|
|
SPECIFICATION OF ACTIVATED BENTONITE
|
PROPERTIES |
| 1.
Bulk
Densities
0.62gm/CC |
| 2.
Moisture
15.00% |
| 3.
Alkalinity
- |
| 4.
Acidity
0.4% |
| 5.
Oil
Retention
30.00% |
| 6.
Bleaching
Efficiency
90.00% |
| 7.
Filtration
7.00 Min. |
|
|
SPECIFICATION OF ACID ACTIVATED BENTONITE POWDER
| 1.
Appearance
:- free flowing white powder |
| 2.
Bulk
Density
:- 0.545 |
| 3.
Moisture
:- 2.5 to 5% |
| 4.
residue
:-1.2 to 1.5 mg. |
| 5.
Bleaching Efficiency :- 65 to 70 |
| 6.
Filterability
:- Fast |
| 7.
Oil Retaintion
:-20% |
| 8.
Oil Surface
area
:- 29.0 to 31.0 |
| 9.
pH
:- 3+ 0.5 |
| 10.
Partical
:- Retaination |
|
Size
:- +100 0% |
|
+150 2% |
|
+200 7% |
|
+325 27% |
|
+400 34% |
| Chemical
Analysis |
|
Sio2
:- 55 to 70% |
|
Al2o3
:- 12 to 15% |
|
Fe2o3
:- 3 to 4% |
|
Mgo
:- 1.5 to 2% |
|
Cao2
:- 1 to 2% |
|
Na2o
:- 0.2% |
|
Loss on ignition :-6 to 8% |
|
|
SPECIFICATION OF SODIUM BASE BENTONITE(Bentone Chem
1)
TEST |
REQUIREMENT |
|
1.
Si02
|
:-
45 to 50% |
|
2.
Fe203 A1203 & Ti02
|
:-
23 to 36% |
|
3.
Ca0
|
:-
2.5% |
|
4.
Mg0
|
:- Traces |
|
5.
L.O.I
|
:-
15.50% |
|
|
SPECIFICATION OF SODIUM BASE BENTONITE(Bentone Chem
2)
|
TEST
|
REQUIREMENT
|
| 1.
Si02 |
:-
Max.
60% |
| 2.
A1203 |
:-
25 to 27% |
| 3.
Fe0 |
:-
5% |
| 4.
L.O.I |
:-
15% |
|
|
SPECIFICATION OF CHEM 3 GRADE BANTONITE
|
CHEMICAL
ANALYSIS
|
|
Sio2
: 40 to 50% |
|
Fe2O3
: 2 to 4% |
|
Al2O3
: 18 to 25% |
|
CO3+HCO3 as CO3 : Max. 5% |
|
Moisture
: Max. 7% |
|
MgO
: 2 to 4% |
|
Na2O
: 2 to 4% |
|
CaO
: 1 to 2% |
|
K2O
: 0 to 1% |
| SCREEN
ANALYSIS: |
| +
30 : 10% Max. |
| -
36+60 : 60% |
| -
60 : 30% |
|
|
SPECIFICATION OF CHEM 4 GRADE BENTONITE
| CHEMICALS
ANALYSIS: |
|
Silica
:-52% |
|
Alumina
:-15% |
|
Ferric Oxide :-0.9% |
|
Titanium
:-1% to 5% |
|
Calcium
:-0.1% to 0.3% |
|
Potassium :-0.2% |
|
LOI
:-8 to 10% |
|
He2O2
:-Low as much as possible |
|
Appearance :-Free Flowing
Powder |
|
Mentomoronite:-75 |
|
Sodium Oxide :-0.1 to 15% |
|
|
SPECIFICATION OF CHEM 5 GRADE BENTONITE
| Chemical
Formula : Al2O34SiO2H2O |
| Physical
Properties : |
| Appearance
:-White powder |
| Sp.
gravity
:-2.3 - 2.5 |
| PH
of 10% Aqueous solution :-8.0 - 8.5 |
| Volatile
matter
:-max 10.0% |
| Chemical
Composition : |
| Silica
:-54.25% |
| Aluminium
:-18.35% |
| Ferric
Oxide :-01.25% |
| TiO2
:-01.25% |
Normal Supplies :
240 mesh / or as per customer's demand.
|
|
SPECIFICATION
OF BENTONE EW : BENTONE
EW rheological
additive is a highly beneficiated, easily dispersible
smectite clay.
| 1.
APPLICATIONS:- |
|
1. Emulasion paints |
|
2. Plaster type compounds |
|
3. Electro deposition coating |
|
4. Foundry paints |
|
5. Ceramic compounds |
|
6. Adhesives |
|
7. Corrosion inhiditive primers |
|
8. Others water based paint systems |
|
9. Cosmetics |
| 10.
Oil-in-water emulsions |
| 11.
Paper coatings |
| 12.
Polishes and cleaners |
| 13.
Welding rods |
| 2.CHEMICAL
AND PHYSICAL DATA:- |
|
1. Composition
:- Highly beneficiated smectite clay |
|
2. Colour
:- Milky white soft powder |
|
3. Specific
gravity :- 2.5 g/cm3 |
|
4. Moisture
:- 6% + 2% |
|
5. pH
:- Effective in the pH range 4-11 |
|
|
Foundry ISI Specification for Type-2 Grade A
|
TEST |
REQUIREMENT |
|
1. Loss on drying % by Weight - |
5.0
(min) |
|
2. pH |
12.00
(max) |
|
3. Gel Formation
- |
9.0
to 10.5 |
| |
25
(min) |
|
4. To pass through 150 micron |
|
IS sieve % by weight (min)
- |
97 |
|
5. To pass through 75 micron |
|
IS sieve % by weight (min)
- |
90 |
|
6. Fineness (wet) to pass micron |
|
IS sieve % by weight (min)
- |
95 |
|
7. Calcium oxide replaceable |
|
Ca % by weight (min)
- |
0.7 |
|
|
Foundry ISI Specification for Type-2 Grade B
|
TEST |
REQUIREMENT |
| 1.
Loss on drying % by Weight - |
5.00
(min) |
| 2.
pH |
12.00
(max) |
| 3.
Gel
Formation
- |
9.0
to 10.5 |
| |
10
(min) |
| 4.
To pass through 150 micron |
|
